Tan Chairs for Kilowatt

These are chairs we did for the intercontinental hotel in downtown Milwaukee for their Kilowatt bar and grill. We used Enduratex suede vinyl and touched up the wood finish.

More Horny Goat Awnings

These are pictures of The Horny Goat Brewery where we added awning enclosures to doors and a walk thru tunnel for patrons to go to their outside bar. We welded galvanized steel framing and Sunbrella canvas covers. Then made 20 gauge plastic windows.

Horny Goat Awnings Done so far

Awnings with door enclosures are often requested this time of year to keep wind and cold out and the heat in. This is some of the awnings we did on the Horny Goat Brewing Co. on 1st street and Becher in Milwaukee. We used Black Sunbrella canvas and welded steel frame work.

Chair and Footrest Recover

We recovered this chair and footrest with a faux leather distributed by Charlotte Fabrics. The set was given new life and the faux leather was a much more economical choice than real leather.

42' Blue Boat Cover

We made a cockpit cover for this 42 foot boat. We used Sunbrella Captain navy canvas. The challenge was the cut outs around the hard top supports and the sides of the arch.

Custom Black Boat Cover

This is a Bow-Cockpit cover we make for trailering on the highway or for at the dock when the owner keeps the boat in the water over night and the summer season. We used Sunbrella canvas and added a screen vent in the back to keep the boats air vents clear.

Tiny Tykes Awning

We finished this awning recover for Tiny Tykes Pet Store on Howell Ave. in Bay View. We used a striking hot pink back light Awning vinyl and custom graphics.

Chairs Repaired

We upholstered these two chairs with a Charlotte Fabrics Material called 9066 linen. We also repaired the wood scroll detail, you can't even tell where we re-carved the filler to match.

New Gazebo Cover

We finished this Gazebo top made with Recacrill acrylic canvas. It has the same 6 year warranty as Sunbrella canvas and will not stretch or sag when wet.

Baby Boomers Awnings

We finished these awnings on Baby Boomer's Bar and Grill this month, with dark brown Sunbrella canvas and welded galvanized steel tubing frames. We silk screened lettering on all of them to catch the attention of passers bye to the name and his products, such as burgers and fish fry.

40' Pontoon Top

We finished this 40 foot pontoon boat top last week with Sunbrella plus canvas which has a water proof finish on the underside of the canvas. We added white scallops for an accent. This boat is owned by River Walk Boat Tours and is used on the Milwaukee river for historic tours and parties.

Orange Boat Cover and Privacy Screen

We made this enclosure with Sunbrella canvas and 30 gauge clear plastic. We added interior privacy curtains behind the windows to protect and hide the electronics.

Clear Boat Enclosure

We finished this clear window plastic aft curtain job last week, They loved the screen windows we made for the hot summer months, but with cooler and wetter weather on the way these will keep them warmer and dryer.

Teal Boat Enclosure

The owner was very happy with this Bimini enclosure, we used Sunbrella canvas and Strata-Glass for the windows around the front. We used roll plastic and Phifertex screen for the drop curtain, along with heavy duty YKK plastic zippers. His old top snapped to the windshield, so we added a bow in the front to increase visibility and when it is hot he can take out all the windows and get air flow all around the top.

Navy Blue Dodger

We finished this sail boat dodger this week. I used Navy blue Sunbrella canvas and 30 gauge roll plastic for the windows, I added a vinyl grip edge to the rear bow for wear and to keep the canvas clean. We made all the windows removable for easy repair and replacement in the future.

Antique Love Seat Restored

This is an antique chair we tufted and pleated, New pad and springs in the cushion too.

Custom Blue Boat Top

We made this snap on boat cover that is great for the highway or mooring at the dock. The Sunbrella canvas we use is great for breathable covers and it stays dry on the inside on those cool mornings.

Ranchero Bed Cover

This is a custom fit Ranchero bed cover we made with navy blue Sunbrella canvas. We used dark blue caps on the snaps to match. We added 1 inch aluminum support rods which offer a lower profile, without a loss in strength, then the old style steel bows.

Green Boat Enclosure

We made a Bimini top and camper back for this 35 foot cruisers boat. We used Phifertex screen for the camper sides and sunbrella canvas storm curtains on the inside. It feels like a screen room when the curtains are down.

Truck Tent

Camping or just on a long trip, I made a screen door for a pick up truck so the owner and wife can sleep in the back.

Black Boat Cover and Bimini

We made this trailering cover out of black sunbrella fabric. We also installed the factory bimini which is in matching black sunbrella fabric.

Teal Boat Top at SMYC

This is a full enclosure we did at SMYC a few of weeks ago. We fit the new bimini to the existing frames and made all new widows and an aft curtain. We used sunbrella canvas for everything and 30 gage strata-glass plastic for the windows.

Country Lanes Awnings and Windbreaks

These are two awnings we finished a couple weeks ago on Country Lanes bowling ally in Franklin, WI. We welded square galvanized steel tubing for the frames and supports which we cleaned and painted the welds to make them less noticeable. We sewed the covers out of a green Northstar vinyl awning material. We also wrapped the support posts as well as the volleyball posts in foam covered in the same green material. Also, windbreaks were added to the hall entrance awning for extra protection from the wind. The larger awning covers the new outdoor bar next to the volleyball court while the smaller indicates the entrance to their hall.

Black Awnings on RaZor Barber Shop

We made these low projection awnings for the RaZor barbershop on KK in Bay View. We welded the frames out of galvanized steel to fit over the existing shaker shingle roof. Then, we sewed the covers out of Black Sunbrella canvas. We are really proud of the extreme improvement these awnings provided to the curb appeal of the store front.

Burgundy Awnings on The Alibi

We recovered and restored these four awnings on the Alibi, in West Allis, WI. First we straightened a bent bit on one of the awnings and added a support to alleviate a sagging problem. Then we brushed and cleaned the awnings before priming and painting the frames, two coats each. We then sewed up new canvas covers for all the awnings out of Burgundy Sunbrella fabric. The photos feature the satisfied customer, and the awnings of course. Hope everyone had a great Fourth of July!